Thursday, July 31, 2014
Wednesday, July 30, 2014
Tuesday, July 29, 2014
Monday, July 28, 2014
Sunday, July 27, 2014
Saturday, July 26, 2014
Friday, July 25, 2014
Thursday, July 24, 2014
Wednesday, July 23, 2014
Tuesday, July 22, 2014
Monday, July 21, 2014
Saturday, July 19, 2014
Friday, July 18, 2014
Thursday, July 17, 2014
Wednesday, July 16, 2014
Tuesday, July 15, 2014
Monday, July 14, 2014
Sunday, July 13, 2014
Saturday, July 12, 2014
Thursday, July 10, 2014
Wednesday, July 9, 2014
A toy motor fan.
Some cutting and wood work equipment.
Cut wood pieces to create a stable base for the fan.
The objective here was to minimize the vibration from the fan, so it was to be connected as tight as possible.
Even the closely packed setup allows for viberation so an alternate option might be an already fixed fan.
Such as this one that I plucked out of an old computer power supply. This worked perfectly well but it needed an output voltage of 12 v. The power source I had was only 5 v.
I used an old, out of use, cell phone charger with a USB charging cable. Cut the front end and separate the red and black wires for power (other wires can be twisted around as they are not needed). This can now be attached to the laptop USB port or directly to the power using the charging adopter.
A mini cross beam was attached to the rig to hold the supports together as the vibration would other wise drive them apart as soon as the fan would start.
Next up was to hold the supports, the crossbeam and the whole rig together. For that I used Ubuntu promotional stickers that I had lying around from some time back when I ordered a set of Ubuntu CDs.
One terminal of the motor was permanently attached to the USB cable, the other one was attached from the USB cable terminal with a conducting ring I salvaged from the same power supply that I picked the extra fan from. The ring was originally used there as a ground wire, but here it seems to make a better use.
When the ring is attached, the vibration from the fan pushes the support rig outwards making it tighter and pulling on the terminal wire that is permanently attached to the motor. When the ring (from the positive terminal) is hooked up with the motor, its wire comes under tensile force and that becomes a positive feed back for the system to keep the wire firmly attached to the motor and hence giving proper voltage and not to spark.
The final image shows how the final version of the support rig looks like when the fan is removed.
All that is need to be done now is for the laptop to be placed in an uplifted position with some space in the middle for the rig and fan to be placed (hardly a few centimeters and the system is kept cool as I run heavy games on it. Seems to me that this was a much better option than buying a 1000 $ cooling fan.